PU2CLR Si4735 Arduino Library
2.1.4
Arduino Library for Si47XX Devices - By Ricardo Lima Caratti
Loading...
Searching...
No Matches
Data Structures
Here are the data structures with brief descriptions:
C
SI4735
SI4735
Class
C
si4735_digital_output_format
Digital audio output format data structure (Property 0x0102. DIGITAL_OUTPUT_FORMAT)
C
si4735_digital_output_format.refined
C
si4735_digital_output_sample_rate
Digital audio output sample structure (Property 0x0104. DIGITAL_OUTPUT_SAMPLE_RATE)
C
si4735_eeprom_patch_header
Patch header stored in a eeprom
C
si4735_eeprom_patch_header.refined
C
si473x_gpio
Data type for Enables output for GPO1, GPO2 and GPO3
C
si473x_gpio.arg
C
si473x_gpio_ien
Data type for Configuring the sources for the GPO2/INT interrupt pin
C
si473x_gpio_ien.arg
C
si473x_powerup
Power Up arguments data type
C
si473x_powerup.arg
C
si47x_agc_overrride
C
si47x_agc_overrride.arg
C
si47x_agc_status
C
si47x_agc_status.refined
C
si47x_antenna_capacitor
Antenna Tuning Capacitor data type manupulation
C
si47x_antenna_capacitor.raw
C
si47x_bandwidth_config
C
si47x_bandwidth_config.param
C
si47x_firmware_information
Data representation for Firmware Information (GET_REV)
C
si47x_firmware_information.resp
C
si47x_firmware_query_library
Firmware Query Library ID response
C
si47x_firmware_query_library.resp
C
si47x_frequency
Represents how the frequency is stored in the si4735
C
si47x_frequency.raw
C
si47x_frontend_agc_control
Adjusts the AM AGC for external front-end attenuator and external front-end cascode LNA
C
si47x_frontend_agc_control.field
C
si47x_property
Data type to deal with SET_PROPERTY command
C
si47x_property.raw
C
si47x_rds_blocka
Block A data type
C
si47x_rds_blocka.raw
C
si47x_rds_blocka.refined
C
si47x_rds_blockb
Block B data type
C
si47x_rds_blockb.group0
C
si47x_rds_blockb.group2
C
si47x_rds_blockb.raw
C
si47x_rds_blockb.refined
C
si47x_rds_command
Data type for RDS Status command and response information
C
si47x_rds_command.arg
C
si47x_rds_config
Data type for FM_RDS_CONFIG Property
C
si47x_rds_config.arg
C
si47x_rds_date_time
C
si47x_rds_date_time.refined
C
si47x_rds_int_source
FM_RDS_INT_SOURCE property data type
C
si47x_rds_int_source.refined
C
si47x_rds_status
Response data type for current channel and reads an entry from the RDS FIFO
C
si47x_rds_status.resp
C
si47x_response_status
Response status command
C
si47x_response_status.resp
C
si47x_rqs_status
Radio Signal Quality data representation
C
si47x_rqs_status.resp
C
si47x_seek
Seek frequency (automatic tuning). ARG1
C
si47x_seek.arg
C
si47x_seek_am_complement
Seek frequency (automatic tuning) AM complement (ARG2, ARG3, ARG4 and ARG5)
C
si47x_set_frequency
AM Tune frequency data type command (AM_TUNE_FREQ command)
C
si47x_set_frequency.arg
C
si47x_ssb_mode
C
si47x_ssb_mode.param
C
si47x_status
Status response data representation
C
si47x_status.refined
C
si47x_tune_status
Seek station status
C
si47x_tune_status.arg
Generated by
1.9.6