Class List

Here are the classes, structs, unions and interfaces with brief descriptions:

CQN8066	QN8066 Class
Cqn8066_cca	CCA - Sets CCA parameters ( Address: 02h)
Cqn8066_cca.arg
Cqn8066_ch_start	CH_START - Lower 8 bits of 10-bit CCA(channel scan) start channel index (Address: 0Ch - Write Only)
Cqn8066_ch_step	CH_STEP - Channel scan frequency step (Address: 0Eh - Write Only)
Cqn8066_ch_step.arg
Cqn8066_ch_stop	CH_STOP - Lower 8 bits of 10-bit channel scan stop channel index (Address: 0Dh - Write Only)
Cqn8066_cid1	CID1 - Device ID numbers ( Address: 05h - Read Only)
Cqn8066_cid1.arg
Cqn8066_cid2	CID2 - Device ID numbers ( Address: 06h - Read Only)
Cqn8066_cid2.arg
Cqn8066_fdev	FDEV - Specify total TX frequency deviation (Address: 25h - Write Only)
Cqn8066_gplt	GPLT - Transmitter soft chip threshold, gain of TX pilot (Address: 27h
Cqn8066_gplt.arg
Cqn8066_int_ctrl	INT_CTRL - Receiver RDS control (Address: 19h - Write Only)
Cqn8066_int_ctrl.arg
Cqn8066_pac	PAC - PA output power target control (Address: 24h - Write Only)
Cqn8066_pac.arg
Cqn8066_rds	RDS - Specify transmit RDS frequency deviation (Address: 26h - Write Only)
Cqn8066_rds.arg
Cqn8066_reg_vga	REG_VGA - X AGC gain (Address: 28h - Read and Write)
Cqn8066_reg_vga.arg
Cqn8066_rssisig	RSSISIG - In-band signal RSSI (Received signal strength indicator) dBuV value. dBuV=RSSI-49( Address: 04h - Read Only)
Cqn8066_rx_ch	RX_CH - Lower 8 bit of 10-bit receiver channel index (Address: 0Bh - Write Only)
Cqn8066_rx_rds	RDS - RDS data byte 0 to byte 7 (Address: 0Fh to 16h - Read Only)
Cqn8066_rx_rds.arg
Cqn8066_snr	SRN - Estimate RF input CNR value( Address: 03h - Read Only)
Cqn8066_status1	STATUS1 - System status ( Address: 0Ah - Read Only)
Cqn8066_status1.arg
Cqn8066_status2	STATUS2 - Receiver RDS status indicators (Address: 17h - Read Only)
Cqn8066_status2.arg
Cqn8066_status3	STATUS3 - Receiver audio peak level and AGC status (Address: 1Ah - Read Only)
Cqn8066_status3.arg
Cqn8066_system1	System1 - Sets device modes (Address: 00h)
Cqn8066_system1.arg
Cqn8066_system2	System2 - Sets device modes (Address: 01h)
Cqn8066_system2.arg
Cqn8066_tx_rds	RDS - RDS tx data from byte 0 to byte 7 (Address: 1Ch to 23h - Write Only)
Cqn8066_tx_rds.arg
Cqn8066_txch	TXCH - Lower 8 bit of 10-bit transmitter channel index (Address: 1Bh - Read and Write)
Cqn8066_vol_ctl	VOL_CT - Audio volume control (Address: 18h - Write Only)
Cqn8066_vol_ctl.arg
Cqn8066_xtal_div0	XTAL_DIV0 - Frequency select of reference clock source (Lower bits - Address: 07h - Write Only)
Cqn8066_xtal_div1	XTAL_DIV1 - Frequency select of reference clock source (Lower bits - Address: 08h - Write Only)
Cqn8066_xtal_div1.arg
Cqn8066_xtal_div2	XTAL_DIV2 - Frequency select of reference clock source (Lower bits - Address: 09h - Write Only)
CRDS_BLOCK1	RDS - First block (RDS_BLOCK1 datatype)
CRDS_BLOCK1.field
CRDS_BLOCK2	Block 2 (RDS_BLOCK2 data type)
CRDS_BLOCK2.commonFields
CRDS_BLOCK2.group0Field
CRDS_BLOCK2.group2Field
CRDS_BLOCK3	Block 3 (RDS_BLOCK3 data type)
CRDS_BLOCK4	Block 4 (RDS_BLOCK4 data type)
CRDS_BLOCK4.utc
CRDS_DATE_TIME
CRDS_DATE_TIME.arg
CWORD16